Does everyone know how to change the iPhone alarm volume in the iOS 10 beta? This is not the new bedtime/wake-up feature; it is simply the standard alarm. Previously, you could use the ringer volume, but this no longer works. It’s always extremely loud, even with the ringer/music volume set to alarm volume iPhone the lowest setting?
On an iPhone, setting an alarm is a simple task. However, what if the iPhone alarm volume is set too low that you miss it or too high that it scares you to death? Numerous iPhone users are experiencing the same issue with iPhone alarm volume that are abnormally loud or quiet.
You are one of them, aren’t you? The solutions in this post will correct an iPhone alarm volume that is either too low or too loud. Before we proceed, it’s necessary to address a few points. Do not disturb mode and the physical Ring/Silent switch have no effect on the iPhone alarm volume. Even if both settings are enabled, your alarm will continue to ring at the set alarm volume iPhone.
Restart your iPhone to begin the troubleshooting process. Often, a temporary glitch or bug is causing the alarm volume issues, which can be resolved with a restart.
2. Check Alarm Volume
The alarm volume cannot be turned using the volume buttons unless the Sound settings option ‘Change with buttons’ is enabled. Therefore, if you wish to adjust the alarm volume, you should first enable this setting. Alternatively, you can adjust the volume of the alarm using the volume slider in the Sound settings.
To do so, navigate to Settings > Sounds & haptics. Adjust the alarm volume using the slider under Ringer and alerts. If you want to be able to change this volume using the volume buttons on your iPhone in the future, turn on the toggle for Change with buttons.
3. Change Alarm Tone
It is possible that the alarm voice you have set is too low or too loud. Therefore, alter the alarm tone and observe the results. To customize your iPhone’s alarm tone, follow these steps:
Step 1: On your iPhone, open the Clock app and navigate to the Alarm tab.
Step 2: In the top-left corner, tap the “Edit” option. Select the alarm you wish to edit.
Step 3: On the next screen, tap on Sound and select a different notification tone.
To save the changes, click the Save button at the top.
4. Check Sleep Mode Alarm
If you’re using the Sleep/Wake addition to its traditional focus on your iPhone alarm volume (previously known as Bedtime), it comes with its own alarm volume. You will need to verify that the alarm volume is set appropriately for your requirements.
Take the following steps:
Step 1: Launch the Clock application and navigate to the alarm tab.
Step 2: Tap on “Change” next to the sleep/wake up time.
Step 3: Scroll down to the Alarm options section, where you’ll find a volume slider.
It is used to adjust the iPhone alarm volume. Simply click the Done button.
Change the volume of the alarm for Sleep mode in the Health app > Your schedule. Next to your schedule, tap Edit. Then make any necessary adjustments to the volume.
5. Turn off Attention Aware Feature
Numerous iPhone users have noted that disabling the Attention Aware feature resolved the alarm volume being too loud or too soft.
This setting is available on the iPhone X and later devices. To disable it, navigate to Settings > Face ID and Attention. Disable the Attention Aware Features toggle.
6. Disable Other Alarm Apps
Do you have any other alarm apps installed on your alarm volume iPhone? Remove them and check to see if they are interfering with the alarm volume.
7. Delete Alarm
If the issue with the alarm volume is limited to a single alarm, try recreating the alarm from scratch. To accomplish this, delete the current alarm and recreate it.
8. Update Phone
If the issue with the alarm volume, There may be a bug in the software upgrade for your iPhone that is causing the alarm volume to fluctuate. To resolve this issue, you’ll need to keep updating your iPhone.
This can be done by going to Settings > General > Software update.
Your iPhone will alert you if an update is available. It should be installed.
After that, re-create the alarm. Since I am limited to a single alarm, try recreating the alarm from scratch. To accomplish this, delete the current alarm and recreate it.
9. Reset Settings
If indeed the iPhone alarm volume remains abnormally loud, reset all of your iPhone’s settings. Fortunately, this is not a manual process, as a single setting is available.
To reset all settings, navigate to Settings > General > Reset > Reset all settings.
This will restore the default values for all customized settings. Discover in detail what happens when you reset the settings on your iPhone.
What are the iPhone’s Attention Aware Features?
With the addition of Face ID, your iPhone can now detect whether you are looking at it using facial recognition. Apple introduced two new features that use Face ID technology to assist you.
Face ID necessitates your attention
Features that draw your attention
Attention is required for Face ID uses facial recognition to confirm your identity before iOS unlocks and allows you to use your iPhone.
Features that draw your attention:
Use the same technology to determine whether you are looking at your device. If your iPhone detects that you are looking at its screen, when it begins to ring, the ringer or alarm volume begins at your set volume level but then decreases the overall volume, as it believes you are aware that it is ringing or sounding the alarm.
iPhone Volume Still Too Low? Download iPhone Volume Booster Apps
When nothing else works, consider using a third-party app. The Equalizer allows you to tailor your playlists to highlight specific elements in music. Increasing the bass or vocals, similar to how Late Night works, allows you to easily tune into your favorite parts.
Some features, however, require payment, and it currently does not work with Apple Music because its developers are barred from accessing the company’s API. Even so, it is still useful if all else fails.
Time to double-check your connected devices
The solutions provided above should resolve your issue. If this does not happen, check the Bluetooth devices that are connected. If you connect a Bluetooth device (headphones or speakers) to your iPhone alarm volume, the alarm will typically play through both your iPhone’s and the connected device’s speaker.
However, due to a bug, this does not always occur. So, go to Settings > Bluetooth and turn off Bluetooth to see if the alarm volume goes back to normal.
